A ring that turns around the finger, a bracelet that feels too tight, a necklace that disappears beneath the neckline, or an anklet that creates pressure while walking can often be traced back to the wrong size.
Finding the right jewelry size is therefore just as important as choosing the design itself. For made-to-measure silver jewelry in particular, an accurate measurement helps each piece sit more naturally on the finger, wrist, neck, or ankle.
A measuring tape, ruler, fine cord, or narrow strip of paper is all you need to take jewelry measurements at home. The essential rule is not to pull the cord or paper too tightly. Jewelry should sit close to the skin without creating pressure, restricting movement, turning constantly, or disappearing beneath clothing.
At Fersknit, proportion, form, and comfort are considered together. Whether you are choosing a 925 sterling silver necklace, bracelet, ring, or anklet, how the piece sits on the body is an important part of the decision.
Before Taking Your Measurements
Estimating your size can make even a small difference noticeable in everyday wear. Half a centimetre may leave a bracelet too loose, cause a ring to turn, make an anklet feel tight, or change where a necklace sits.
For a more accurate measurement:
- Avoid measuring your wrist very early in the morning, as its circumference can change slightly during the day.
- Do not measure immediately after exercise, a hot shower, or prolonged exposure to warm weather.
- Measure the wrist at the exact point where you intend to wear the bracelet.
- Measure an anklet directly against the bare ankle rather than over a sock.
- When choosing a necklace, consider not only your neck measurement but also where you want the chain to sit in relation to your neckline.
If you are choosing jewelry as a gift and need help with sizing, contact us through Instagram DM or at info@fersknit.com.
How to Measure Your Ring Size
Always measure the finger on which the ring will be worn. Measurements can differ between the right and left hands, as well as between individual fingers on the same hand.
If you already own a ring that fits the intended finger, place it on a flat surface and measure its internal diameter in millimetres. Measure straight across the widest part of the inner opening, without including the outer edges.
Band width also affects how a ring feels. A ring with a narrow band and one with a wide band may fit differently, even when they are made in the same size. When choosing a silver ring, consider how much of the finger the design will cover.
| Band Width or Fit | What to Consider |
| Narrow band | Tends to move more freely on the finger; your usual size is generally suitable. |
| Wide band | Fits more closely around the finger and may require a slightly larger size. |
| Finger with a prominent knuckle | The ring should pass over the knuckle without remaining too loose at the base. |
| Ring for everyday wear | It should remain stable without turning constantly or leaving a deep mark. |
Average Turkish Ring Sizes
The sizes below are general references based on the Turkish ring sizing system. For a more reliable result, measure the internal diameter of a ring that already fits or have your finger professionally measured by a jeweler.
- Little finger: Turkish sizes 4–7
- Ring finger: Turkish sizes 12–14
- Index and middle fingers: Turkish sizes 15–18
These ranges are only a guide. Every finger should be measured separately before placing an order.
How to Measure Your Wrist for a Bracelet
Measure the wrist at the exact point where the bracelet will sit. If you have a flexible measuring tape, wrap it directly around the wrist. If not, use a piece of cord or a narrow strip of paper, mark where the ends meet, and measure the length against a ruler.
Fersknit’s woven bracelets may loosen naturally by approximately 0.5–1 cm with initial wear. Cord bracelets do not loosen in the same way.
Please provide your exact wrist circumference when ordering. We prepare the bracelet with the necessary allowance so that it sits comfortably without feeling tight or excessively loose. If you prefer a more relaxed fit, add the additional space you would like to your measurement when placing the order.
Average Wrist Measurements
The measurements below are general references. For the best fit, we recommend measuring your own wrist.
Women’s bracelets
- Slim wrist: 14–15 cm
- Average wrist: 15–16.5 cm
- Wide wrist: 16.5–19 cm
Men’s bracelets
- Slim wrist: 15.5–16.5 cm
- Average wrist: 17–18 cm
- Wide wrist: 19–21 cm
Explore the silver bracelet collection after taking your measurement.
How to Choose a Necklace Length
One of the most common mistakes when choosing a necklace is considering the chain length alone. Pendant size, neckline, and neck circumference can all change where the piece sits.
A 45 cm chain may rest near the collarbone on one person and sit higher on another. The measurements below offer a general guide:
| Chain Length | Approximate Position | Styling Note |
| 35–40 cm | Close to the neck | Visible with open necklines, with limited room for movement. |
| 40–45 cm | Around the collarbone | A versatile range for everyday wear and a variety of necklines. |
| 50–55 cm | Upper chest | More visible over T-shirts, shirts, and knitwear. |
| 60 cm and longer | Lower over clothing | Suitable for longer necklace styles and layered combinations. |
When choosing a silver necklace, consider the chain length, pendant form, and neckline together.
With V-necks and open-collar shirts, a 40–45 cm chain generally places the pendant close to the neckline. With crew necks and knitwear, a 50–55 cm chain allows the necklace to remain more visible over the fabric.
How to Measure Your Ankle for an Anklet
Measure around the point where you would like the anklet to sit. Wrap a flexible measuring tape around the bare ankle and note the circumference. If you do not have a measuring tape, use a piece of cord or a narrow strip of paper and measure it against a ruler.
Unlike a bracelet, an anklet moves continuously as you walk. A size that is too tight can create pressure, while an excessively loose piece may come into contact with sandals, shoe fastenings, or socks.
As ankles can swell slightly during warm weather, avoid taking the measurement very early in the morning. When exploring silver anklets, also consider the shoes you plan to wear with them. The anklet should sit comfortably around the ankle without interfering with straps or buckles.
How to Estimate Jewelry Size for a Gift
A ring presents the greatest sizing challenge when the recipient’s measurements are unknown. Even a small difference can affect whether it can be worn comfortably.
If possible, use a piece of jewelry the recipient already wears as a reference:
- Measure the internal diameter of a ring worn on the intended finger.
- For woven, cord, or macramé bracelets, choosing a larger size may offer more flexibility, as these designs can often be shortened.
- A necklace between 40 and 45 cm can provide a versatile starting point.
- Anklets can often be shortened, so a slightly larger size may be more practical when the exact measurement is unknown.
- For personalized necklaces, symbolic bracelets, or silver rings, use an existing piece as a reference rather than relying entirely on an estimate.
If you are uncertain, contact us through Instagram DM or at info@fersknit.com. We aim to respond to sizing questions within 24 hours.
The Role of Fit at Fersknit
With made-to-measure silver jewelry, size determines how the piece sits and moves on the body.
The same symbol may appear more prominent on a shorter chain and rest closer to the chest on a longer one. A bracelet that is too close-fitting may create pressure, while one that is too loose may turn repeatedly around the wrist.
At Fersknit, fit is considered alongside form and everyday comfort. Once you know your measurements, you can explore our necklaces, bracelets, rings, and anklets according to how you prefer to wear your jewelry.
Frequently Asked Questions
Can I Measure My Ring Size with a Piece of Cord?
We do not recommend using cord to determine ring size, as it can stretch, shift, or sit unevenly around the finger. Measuring the internal diameter of a ring that already fits will usually provide a more reliable result. Having your finger measured by a jeweler remains the most accurate method.
How Do I Find My Turkish Ring Size?
Measure the internal diameter of a ring that fits the intended finger, then compare the result with the Turkish ring size chart. Do not use a ring worn on a different finger as a reference.
What Is the Average Turkish Ring Size for the Ring Finger?
The average Turkish ring size for the ring finger is generally between 12 and 14. Index and middle fingers often fall between Turkish sizes 15 and 18, while the little finger may fall between sizes 4 and 7.
These are approximate ranges. Measuring an existing ring or visiting a jeweler will provide a more reliable result.
How Much Should I Add to My Wrist Measurement?
You do not need to add extra space for a standard fit. Provide your exact wrist circumference, and we will prepare the bracelet with the necessary allowance for comfortable wear.
If you prefer a looser fit, add your preferred amount of additional space when submitting your measurement.
What Is the Average Bracelet Size?
An average women’s wrist measurement is approximately 15–16.5 cm. For men, the average is approximately 17–18 cm. We still recommend measuring the intended wrist rather than relying only on these general ranges.
What Is a Versatile Necklace Length for Everyday Wear?
A chain between 40 and 45 cm is a versatile choice for everyday wear and works with many necklines. The final position will also depend on neck circumference and the size of the pendant.
How Do I Measure My Ankle for an Anklet?
Measure the bare ankle at the exact point where you would like the anklet to sit. Wrap a flexible measuring tape around the ankle without pulling it too tightly.